Software The Battery Analyzer application version V3 displays discharge and recharge curves. Reports are stored on disk and printed. See below, a PDF report example. All parameters can be set in a ‘profile’ for each battery type. A simple profile selection by typing or reading the barcode serial number is done to start the correct measurement. The application shows a continuous readout of the voltages, current and measured capacity. The Battery Analyzer application operates in demo mode without any Battery Condition Tester devices. About Downloading new software: Dear user, if your hardware, software and PC combination works well then do not download any other version and let your system work as it is. As the saying goes: if its not broken don't fix it. If a new download is necessary we will inform you. BatteryAnalyzerInstallerV3.16.6.0 Release Date: 29-06-2021

Documentation The user manual provides information on the installation and operation of the Battery Analyzer Download Battery Analyzer User manual All the technical specifications are available in the datasheet Download the Battery Analyzer Datasheet

PDF Report Example An example of a test report that could be provided to the customer after testing the battery.   Download the PDF report example

Copyright 2023 DVBit. All rights reserved.